-75%

Bond It Bitubond Range Bitumen Roofing & Flashing Primer Solution Black 1L Litre

Original price was: $8.79.Current price is: $2.20.

SKU: 5060021363626 Categories: , ,

Product information

Description:
A highly penetrative, thin bituminous solution for priming surfaces prior to the application of bituminous

materials

Uses
BITUMEN PRIMER can be used to prime concrete roofs and
floors, cementitious screeds/renders, bitumen felt, mastic
asphalt, weathered corrugated iron and steel. It is the
recommended primer for use with the BITUBOND range of
bituminous roof coatings, flashing tapes or mastics.

Preparation
All surfaces must be structurally sound, clean, dry and
free from surface contaminants such as
grease, rust and dirt. If necessary,
remove any organic growth i.e. moss or
lichen, with a fungicidal wash such as
MOULD STOP. On bare metal a rust
inhibiting product, such as red oxide or
zinc phosphate should be applied and
allowed to harden.

Application
Apply by brush or roller. Using a brush, scrub the primer into
the surface. Ensure that only a thin coat is applied and that
there is no pooling. Priming should extend at least 75mm
beyond the area to be waterproofed. Leave to dry for 2-3
hours before continuing with further work.
With fibre cement or dry rag based bituminous felts, apply
generously to saturate the surface.

Drying Time
Approximately 3-6 hours depending on drying conditions.
May be extended for heavy coatings or in cold weather.

Cleaning Of Tools
Clean with paraffin (kerosene) or Bond It WHITE SPIRIT

Colour
Black in colour.

  • Guarantee – 1 month
  • Black

Features and benefits

Colour
Black in colour.

Container Size
Available in 1L metal tins.

Storage Life
Minimum of 5 years from date of manufacture under good
storage conditions in original unopened containers.

Storage Conditions
Store under cover away from sources of heat and ignition.
Keep containers sealed when not in use.

Disposal of Containers
Do not leave containers on site where residue could be a
hazard to children, animals or the environment. Replace lids
securely and remove any containers to a central disposal
point.

Description

Product information

Description:A highly penetrative, thin bituminous solution for priming surfaces prior to the application of bituminousmaterialsUsesBITUMEN PRIMER can be used to prime concrete roofs andfloors, cementitious screeds/renders, bitumen felt, masticasphalt, weathered corrugated iron and steel. It is therecommended primer for use with the BITUBOND range ofbituminous roof coatings, flashing tapes or mastics.PreparationAll surfaces must be structurally sound, clean, dry andfree from surface contaminants such asgrease, rust and dirt. If necessary,remove any organic growth i.e. moss orlichen, with a fungicidal wash such asMOULD STOP. On bare metal a rustinhibiting product, such as red oxide orzinc phosphate should be applied andallowed to harden.ApplicationApply by brush or roller. Using a brush, scrub the primer intothe surface. Ensure that only a thin coat is applied and thatthere is no pooling. Priming should extend at least 75mmbeyond the area to be waterproofed. Leave to dry for 2-3hours before continuing with further work.With fibre cement or dry rag based bituminous felts, applygenerously to saturate the surface.Drying TimeApproximately 3-6 hours depending on drying conditions.May be extended for heavy coatings or in cold weather.Cleaning Of ToolsClean with paraffin (kerosene) or Bond It WHITE SPIRITColourBlack in colour.

  • Guarantee – 1 month
  • Black

Features and benefits

ColourBlack in colour.Container SizeAvailable in 1L metal tins.Storage LifeMinimum of 5 years from date of manufacture under goodstorage conditions in original unopened containers.Storage ConditionsStore under cover away from sources of heat and ignition.Keep containers sealed when not in use.Disposal of ContainersDo not leave containers on site where residue could be ahazard to children, animals or the environment. Replace lidssecurely and remove any containers to a central disposalpoint.

Brand Bond it
Pack quantity 1
Weight (g) 1000g
Product code 5060021363626

Reviews

There are no reviews yet.

Be the first to review “Bond It Bitubond Range Bitumen Roofing & Flashing Primer Solution Black 1L Litre”

Your email address will not be published. Required fields are marked *